TotalBoat - Epoxy Resin Crystal Clear - 1 Gallon Epoxy Resin & Hardener Kit f...

Description

TotalBoat - Epoxy Resin Crystal Clear - 1 Gallon Epoxy Resin & Hardener Kit f...
Product Overview
Ultra Clear, High-Build, High-Gloss Coating for Bars,
Tables & Counter Tops TotalBoat TableTop Epoxy makes it easy to get a
beautiful, glassy finish, whether you’re a pro, or it’s your first time using
a pourable epoxy. Read more TotalBoat TableTop Epoxy Gallon Kit Creates 12
Square Feet of Crystal Clear Perfection. Pros & DIYers alike choose TableTop
Epoxy for professional results TotalBoat TableTop Epoxy is a 2-part, ultra-
clear, 100% waterproof, liquid epoxy resin coating for bar tops, counter tops,
table tops, furniture, chart tables, galley tables, coasters, DIY arts &
crafts projects, and much more. This easy-to-use, pourable resin has a simple
1:1 mix ratio by volume to ensure great results, even if it's your first time
working with it. After pouring the mixed resin onto the prepared surface,
small bubbles may appear, but they can be popped easily by waving a heat gun
back and forth just above the surface. This self-leveling epoxy spreads out
evenly as it cures. After it dries clear & glossy, it looks so wet, people are
afraid to touch it! TableTop is also thicker, clearer & easier to use than
varnish—and a lot more heat resistant. It creates the same thick, glossy,
super-clear coating you see on restaurant bar and table tops. Plus its high
viscosity and high-build properties mean a single coat is equal in appearance
to several coats of expensive varnish. Customize your top by embedding objects
beneath the surface. Clear coat a flat surface as is, or be creative & embed
interesting objects beneath the crystal clear coating. Preserve & display
photos, bottle caps, magnets, charms, & other cherished trinkets on your
custom top. For a striking 3-D effect that makes objects seem to float beneath
the surface, pour multiple 1/8" flood coats (waiting 4-8 hours between each
coat), and embed objects in each layer. Is cured TableTop food safe? TotalBoat
TableTop contains no harmful VOCs, which means a safer work environment when
mixing, pouring, stirring & spreading, but be sure to wear proper gloves and
have adequate ventilation. TableTop is also BPA-free, so once cured, it's more
suitable for contact with food. That said, we don't recommend using epoxy for
a cutting board. TotalBoat TableTop Epoxy Features: Crystal clear, durable,
liquid epoxy coating for bar tops, tabletops, and counters. Compare finish
clarity to System Three MirrorCoat & other clear epoxies. Pourable, self-
leveling formula cures as smooth as glass. Cured material does not blush like
other epoxies, and resists heat better than varnish. Deep, glossy finish is
100% waterproof. Cured surface will not distort with age. Durable finish
resists scratches, stains, and yellowing. Apply to horizontal and level,
properly prepared wood, stone, concrete, metal, & ceramic surfaces. Available
in 2 Quart, Gallon, & 2 Gallon kits to suit any project size. Read more
Frequently Asked Questions Q: What’s the coverage for TotalBoat TableTop
Epoxy? A: At 1/8” thickness: 6 sq. ft. per mixed 2-Quart Kit; 12 sq. ft. per
mixed Gallon Kit; 24 sq. ft. per mixed 2-Gallon Kit. At ¼” thickness: 3 sq.
ft. per mixed 2-Quart Kit; 6 sq. ft. per mixed Gallon Kit; 12 sq. ft. per
mixed 2-Gallon Kit. Q: Why do I need multiple coats? Won’t one thick coat do
the trick? A: Multiple thin layers give you a sealer/leveling coat and as much
build as you would like without the high risk for errors, bubbles, or a wavy
surface. Q: Can I use it on my bar top outside? A: You can, but it will be
exposed to UV rays that can make it look amber or delaminate over time,
depending on substrate. You’ll want to overcoat it with a quality UV-filtering
varnish. Read more TotalBoat TableTop Epoxy is Very Easy to Use! Prepare the
surface To contain the liquid epoxy, apply plastic packing tape (as it can be
removed easily) around the edges of the table.Delicate objects such as photos
or maps can be damaged by epoxy. Coat them first with an alternate clear coat
(polyurethane or acrylic sealers are recommended) before applying TableTop
Epoxy.Combine the epoxy resin (Part A) and hardener (Part B) at the specified,
simple mix ratio of 1 to 1 by volume, and mix for 3-5 minutes, then transfer
to another mixing cup and keep stirring until the mixture is blended
thoroughly. To begin, use a brush to apply a very thin sealer coat of TableTop
Epoxy to the table top or bar top to seal porous surfaces. This includes
applying a thin sealer coat to any objects that will be embedded. If you skip
this step, the porous surface or embedded objects will release large air
bubbles that can ruin your project. Pour the mixed epoxy Once the sealer coat
has set, apply a flood coat.Pour less epoxy into any narrower areas, and more
epoxy into wider, more open areas.Each flood coat should be no more than 1/8”
thick.You can pour multiple flood coats (waiting at least 4 hours in between
each coat) until you achieve the desired thickness. Tip: Multiple pours are
recommended. Do not attempt one thick flood coat because air bubbles will get
trapped beneath the surface, and the excess heat generated by a thick pour
will distort the surface itself. The epoxy will not self level or cure
properly. Spread evenly Flood coats will flow and self level, but tools such
as brushes, plastic spreaders, and squeegees may be used to help spread the
mixed epoxy resin evenly across the surface.If you like, you can embed objects
such as shells or bottle caps at this stage. You can also embed objects in
subsequent flood coats in order to make the objects appear to float beneath
the surface. Remove surface bubbles A few minutes after the flood coat is
applied, bubbles will rise to the surface. To pop the bubbles, use a heat gun
(or butane torch) on low power, hold it six inches above the surface of the
epoxy resin, and slowly sweep the heat gun back and forth over the surface,
until the bubbles disappear. It's very important to wave the heat gun around
and keep it moving, so you don't burn or singe embedded objects.TotalBoat
TableTop Epoxy can usually be recoated in 4-8 hours without any additional
prep work or sanding.If the previous layer is allowed to dry completely, the
surface should be scuff-sanded with 220-320 grit sandpaper, for optimal
adhesion between coats. After sanding, wipe the surface with a solvent such as
acetone or denatured alcohol to remove dust and other contaminants. Allow the
surface to dry before applying the next 1/8" flood coat.For any areas that
have blemishes, sand with 80-grit sandpaper, before applying a final coat.
Read more TotalBoat Customers Get Great Results! Coffee table with embedded
pennies "Great product. Exactly what I needed to finish my penny coffee table
project." - Vince, via Amazon Reviews Dining table with embedded decal "My
wife wanted a custom dining table with an embedded Compass Rose decal. I did a
seal coat, then the first flood coat of TableTop Epoxy. I applied the Compass
Rose decal on top of the first flood coat because I wanted the decal to be
raised above the wood surface. Waited four hours, then did a second 1/8" pour
of TableTop Epoxy. I beveled the edges and the table is beautiful. All my
neighbors want me to make one for them!" - Joe O., TotalBoat store customer
Boat table with embedded objects "This stuff is awesome. Use a small heat gun
to quickly pop any bubbles. We used this for a boat table with a map, compass,
micrometer, anchor trinket, and a silver dollar "trapped" in the clear epoxy.
One tip: order extra. A whole gallon did not cover the galley table more than
a quarter inch. I wish I had bought two gallons because you can recoat between
four to eight hours without any prep or sanding. Highly recommend!" - Brendan
Keefe, via Amazon Reviews Clear coated tabletop "Easy to work with, perfect
clear finish." - Nicole Littletaylor, via Amazon Reviews
Features
CRYSTAL CLEAR, HIGH GLOSS FINISH: Get stunningly clear, beautiful results on bar tops, table tops, and countertops. Ideal for kitchen and bath remodeling projects.
TWO PART POURABLE EPOXY IS EASY TO USE: Simple 1: 1 mix ratio, easy to tint with mica powder, alcohol ink, and liquid pigments. Self-leveling resin system is easy to pour.
DURABLE EPOXY RESISTS SCRATCHES, STAINS, AND YELLOWING: Cures smooth as glass at room temperature, with no blushing. 100% waterproof upon full cure.
WIDE RANGE OF PROJECTS: Get pro results on wood, metal, stone, ceramic and concrete tables, bar tops, countertops as well as resin art, embedding objects, decoupage, casting & other crafting projects.
PREMIUM QUALITY EPOXY SYSTEM FOR DIY AND PROFESSIONAL MAKERS. BPA-free formula contains no VOCs. Choose this smart alternative to products containing harsh industrial chemicals. 1 Gallon kit includes 1/2 gallon resin & 1/2 gallon hardener. 100% Made in the USA.
Details
Is Discontinued By Manufacturer : No
Product Dimensions : 7 x 5 x 10 inches; 9.3 Pounds
Date First Available : June 8, 2016
Manufacturer : TotalBoat
Best Sellers Rank: #913 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #3 in Tile Epoxy Adhesives
#3 in Tile Epoxy Adhesives
Customer Reviews: 4.6 out of 5 stars 2,332 ratings
Quality Products
Have peace of mind knowing that your order will arrive original factory sealed packaging. That means that you'll have the full force of the manufacturer's warranty to protect your purchase.
Fast and Free Shipping
You're already purchasing the item. Why pay additional for shipping, especially slow shipping? We get your order shipped out and delivered to your doorstep as quickly as possible.
Commitment
We are committed to making sure that you leave this transaction satisfied. That means having access to real people that get your questions and concerns answered quickly. Give us a shot and we will make sure that you will look to us again!
This listing is powered by JoeLister