Simpson Strong-Tie ETIPAC10 CRACK-PAC Injection Epoxy 9oz

Description

The Crack-Pac® injection epoxy is designed to repair cracks in concrete ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams. The mixed adhesive has the viscosity of a light oil and a low surface tension, allowing it to penetrate fine to medium-width cracks in dry, damp or wet conditions with excellent results. Resin is contained in the cartridge and hardener is contained in the nozzle.
Key Features
Dispenses with a standard caulking tool, no special dispensing tool needed
Clean and easy to mix
Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
Chemically bonds with the concrete to restore strength
Non-shrink material resistant to oils, salts and mild chemicals
Meets the requirements of ASTM C881, Type I, Grade 1, Class C
Applications
Crack Repair: Structural
Crack Repair: Non-Structural
Applications
Suitable for repair of cracks ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams
Can be used to inject cracks in dry, damp or wet conditions with excellent results. Not for use in actively leaking cracks.
In order for components to mix properly, the resin and hardener must be conditioned to 60°F–80°F before mixing
Color
Resin - blue, hardener - clear, mixed: light amber. The color of epoxy will change from amber to blue during the cure process and then fade back to light amber within a few weeks of installation.
Storage Conditions
For best results, store between 45°F and 95°F
Shelf Life
24 months from date of manufacture, unopened
Clean Up
Wipe up with cotton cloths. If desired scrub area with abrasive, waterbased cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), laquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material – Chip or grind off surface.
Options
Crack-Pac® injection epoxy is also available in the Crack-Pac Injection Kit. (ETIPAC10KT). The kit includes everything needed to pressure inject approximately 8 lineal feet of cracks (assumes a concrete thickness of 4" and 1/16" crack width).
2 Crack-Pac cartridge/nozzle sets
12 E-Z-Click injection ports
2 E-Z-Click injection fittings with 12" tubing
1 pint of ETR paste-over epoxy (8 oz. of resin + 8 oz. of hardener)
4 disposable wood paste-over applicators
1 pair latex gloves
Installation video