Set of 3 Atlas Sound MS1012RF Rubber Feet pre 2003 MS Series microphone stands

Description

Set of 3 Atlas Sound MS1012RF Rubber Feet for pre 2003 MS Series microphone stands.
You get 3 rubber feet including 3 metal push nuts/washers.
The last photo of a base is for illustration purpose only and show these feet installed. The base is NOT included.
Directions for installation:
Remove the push nuts/washers and flatten the tabs slightly. This will help them grip better when installed.
Apply contact cement to the top of the feet and also to the round spots in the metal base where the feet are placed.
After the contact cement dries (see the can for drying time, usually 15 minutes) put the feet in the base.
Install the push nuts on the center pins using a 9/32" nut driver (or similar tool) and you're done.
Please let me know if you have any questions or need assistance with installation. It's really very simple.