Seachem CupriSorb 4L (1 gallon) removing chelated copper heavy metals

Description

​​​​​​​
Ecoquatic
​​​​​​​
Ecoquatic
Buy Now!
Seachem CupriSorb 4L (1 gallon) removing chelated copper heavy metals
Best Pricing
Fast Shipping
Premium Quality
POWERFUL: CupriSorb is a powerful adsorbent of copper and heavy metals.
REMOVER: CupriSorb will remove copper more rapidly and efficiently than carbon making it ideal for emergency copper removal.
EXTRACTS: CupriSorb extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color.
USE: If placed in continuous use, it will gradually extract even precipitated copper from the gravel/substrate bed as well.
DIRECTIONS: Use 250 mL for every 600 L (150 US gallons) to remove up to 7,500 mg (12 ppm) of copper. Use in filter media bag such as The Bag. For best results, CupriSorb should be placed so as to maximize the flow of water through it.
Seachem CupriSorb 4L(1 Gallon) **removing chelated copper heavy metals**
250 milliliters removes up to 7,500 milligrams of copper
Will allow maintenance of invertebrates in copper treated tanks by removing copper leaching from substrate
Will remove copper more rapidly and efficiently and is thus ideal for emergency copper removal
Powerful adsorbent of copper and heavy metals
'
Seachem CupriSorb is a narrow spectrum, synthetic adsorbent based filter material for removing copper and heavy metals from either freshwater or marine water. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous service, it will gradually extract even precipitated copper and make invertebrate culture possible in tanks previously heavily treated with copper. CupriSorb is a powerful copper specific chelating resin.
Why It Is Different
Competing products are not chelating products, but merely cation exchange resins. Such resins can remove copper from freshwater but are ineffective in saltwater.
Directions
Use 500 mL for every 1,200 L (300 gallons*) to remove up to 15,000 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it.
To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color.
Use MultiTest Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated.
REGENERATION:
Soak in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb or Purigen.
Fast Shipping
Hassle Free Returns
Our standard shipping  is free. Transit time varies from 2 to 5 business days. We only ship within the continental USA, we do not ship to Alaska, Hawaii, Puerto Rico, APO addresses or any other USA territory.
​​​​​​​
We as sellers pay the return shipping for all our customers.  All order qualify for returns within 30 days of receipt. You may return most new, unopened item for a full refund. Other returns may incur at 10% restocking fee. **Due to high shipping cost international customers are require pay return shipping
Commitment
Communication is an important part in  giving you an enjoyable encounter, and in making sure that all of your needs are taken care of. Please feel free to contact us via eBay Messages, and we will work on turning any negative experiences into a more enjoyable one. Please leave us positive feedback if you are satisfied with our service.
We understand that it is important for our customers to get what they ordered as fast and as hassle free as possible. All of our products are shipped from our suppliers directly to you. We work with suppliers with high quality products to give you the best goods possible. It is important for us to give our customers an enjoyable experience, as we put our customers first. In the uncommon occurrence when a customers is not contented with the product they receive, we will do all that we can to fix the issue. If you have any inquiries, please let us know and we will fix it! We promise the best when shopping with us.
Link to my eBay Store
​​​​​​​ Welcome to Ecoquatic
Best Pricing
Fast Shipping
Premium Quality
Seachem CupriSorb 4L(1 Gallon) **removing chelated copper heavy metals** ---250 milliliters removes up to 7,500 milligrams of copper ---Will allow maintenance of invertebrates in copper treated tanks by removing copper leaching from substrate ---Will remove copper more rapidly and efficiently and is thus ideal for emergency copper removal ---Powerful adsorbent of copper and heavy metals Seachem CupriSorb is a narrow spectrum, synthetic adsorbent based filter material for removing copper and heavy metals from either freshwater or marine water. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous service, it will gradually extract even precipitated copper and make invertebrate culture possible in tanks previously heavily treated with copper. CupriSorb is a powerful copper specific chelating resin. Why It Is Different Competing products are not chelating products, but merely cation exchange resins. Such resins can remove copper from freshwater but are ineffective in saltwater. Directions Use 500 mL for every 1,200 L (300 gallons*) to remove up to 15,000 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. Use MultiTest Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated. REGENERATION: Soak in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb or Purigen. Fast Shipping
​​​​​​​
Ecoquatic
Buy Now!
Seachem CupriSorb 4L (1 gallon) removing chelated copper heavy metals
Seachem CupriSorb 4L(1 Gallon) **removing chelated copper heavy metals**
250 milliliters removes up to 7,500 milligrams of copper
Will allow maintenance of invertebrates in copper treated tanks by removing copper leaching from substrate
Will remove copper more rapidly and efficiently and is thus ideal for emergency copper removal
Powerful adsorbent of copper and heavy metals
Seachem CupriSorb is a narrow spectrum, synthetic adsorbent based filter material for removing copper and heavy metals from either freshwater or marine water. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous service, it will gradually extract even precipitated copper and make invertebrate culture possible in tanks previously heavily treated with copper. CupriSorb is a powerful copper specific chelating resin.
Why It Is Different
Competing products are not chelating products, but merely cation exchange resins. Such resins can remove copper from freshwater but are ineffective in saltwater.
Directions
Use 500 mL for every 1,200 L (300 gallons*) to remove up to 15,000 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it.
To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color.
Use MultiTest Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated.
REGENERATION:
Soak in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb or Purigen.
Fast Shipping
Hassle Free Returns
​​​​​​​
We as sellers pay the return shipping for all our customers.  All order qualify for returns within 30 days of receipt. You may return most new, unopened item for a full refund. Other returns may incur at 10% restocking fee. **Due to high shipping cost international customers are require pay return shipping
Fast Shipping
Our standard shipping  is free. Transit time varies from 2 to 5 business days. We only ship within the continental USA, we do not ship to Alaska, Hawaii, Puerto Rico, APO addresses or any other USA territory.
Commitment
Communication is an important part in  giving you an enjoyable encounter, and in making sure that all of your needs are taken care of. Please feel free to contact us via eBay Messages, and we will work on turning any negative experiences into a more enjoyable one. Please leave us positive feedback if you are satisfied with our service.
We understand that it is important for our customers to get what they ordered as fast and as hassle free as possible. All of our products are shipped from our suppliers directly to you. We work with suppliers with high quality products to give you the best goods possible. It is important for us to give our customers an enjoyable experience, as we put our customers first. In the uncommon occurrence when a customers is not contented with the product they receive, we will do all that we can to fix the issue. If you have any inquiries, please let us know and we will fix it! We promise the best when shopping with us.
Link to my eBay Store
​​​​​​​ Welcome to Ecoquatic
Best Pricing
Premium Quality
Fast Shipping
Seachem CupriSorb 4L(1 Gallon) **removing chelated copper heavy metals**
250 milliliters removes up to 7,500 milligrams of copper
Will allow maintenance of invertebrates in copper treated tanks by removing copper leaching from substrate
Will remove copper more rapidly and efficiently and is thus ideal for emergency copper removal
Powerful adsorbent of copper and heavy metals
Seachem CupriSorb is a narrow spectrum, synthetic adsorbent based filter material for removing copper and heavy metals from either freshwater or marine water. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous service, it will gradually extract even precipitated copper and make invertebrate culture possible in tanks previously heavily treated with copper. CupriSorb is a powerful copper specific chelating resin.
Why It Is Different
Competing products are not chelating products, but merely cation exchange resins. Such resins can remove copper from freshwater but are ineffective in saltwater.
Directions
Use 500 mL for every 1,200 L (300 gallons*) to remove up to 15,000 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it.
To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color.
Use MultiTest Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated.
REGENERATION:
Soak in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb or Purigen.
Fast Shipping