-40%

Sanded Caulk #30 Sand Beige 10.5oz

$ 3.69

Availability: 100 in stock
  • MPN: Does not apply
  • Condition: New
  • Item must be returned within: 30 Days
  • Brand: LATICRETE
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer

    Description

    Uses
     For caulking around sinks, tubs and showers
     Great for sealing joints between countertop and backsplashes
     Corner joints where walls meet
    Advantages
     Resists mold & mildew growth.
     Stain resistant
     Matches all 40 LATICRETE® grout colors
     Easy to smooth and tool
     Adheres well to plumbing fixtures
     Resistant to staining and cracking
     Flexible
    Approximate Coverage
     Coverage will vary depending upon joint size and width. Consult LATICRETE Technical Services for exact coverage.
     Approximately 25 lineal feet (7.62 m) per tube at 1/4" x 1/4" (6 x 6 mm) joint width.
    Limitations
     For interior use only.
     Not for submerged and or permanent wet area applications. Use LATASIL™.
     Sealants are not replacements for waterproofing membranes. When a waterproofing membrane is required, use a LATICRETE Waterproofing Membrane (see Section 10 FILING SYSTEMS).
     For sensitive porous substrates such as limestone and sandstone, test sealant on a small area for any indication of fluid migration prior to job commencement.
     Not for joint applications where physical abuse or abrasion is likely.
     Not a structural glazing adhesive.
     Joint width should not exceed 1/2" (12.77 mm) thickness and no thinner than 1/8" (3.2 mm).
     For perimeter sealing or expansion joint design, the ratio of the joint width to sealant depth should be no greater than 2 times the width than depth.
    Cautions
     Protect finished work from traffic until fully cured.
     Uncured sealant may irritate eyes if contact is made. Avoid contact with sealant until cured.
     KEEP OUT OF REACH OF CHILDREN
     If contact of uncured sealant is made on skin, wash with soap and water immediately.
     Check with MSDS sheet for further cautions.
    Listing and template services provided by inkFrog