-40%
PLEXUS MA320 METHACRYLATE POLYMER ADHESIVE 490ML 2 PART EPOXY 32000X BRAND NEW !
$ 47.51
- Description
- Size Guide
Description
PLEXUS MA320 METHACRYLATE POLYMER ADHESIVE 490ML 2 PART EPOXY NEW SEALED PART NUMBER 32000X UPC 07814332000XBRAND NEW IN TUBE SEALED CREAM COLOR
LOT# 903212
REQUIRES USE OF SPECIAL CAULK GUN
Plexus MA 320 is a two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. It uses a 10:1 ratio, features a working time of 8 to 12 minutes, and achieves 75% of ultimate strength in 25 to 30 minutes. It is also resistant to acids, bases, and salt solutions.
MA320 is an excellent choice for composite bonding applications in the transportation, marine, and engineering construction industries because it requires virtually no surface preparation. It provides superior toughness at temperatures below 0°F. 1 year shelf life on adhesives and 6 to 9 months on activators. Available in white and packaged in a ready-to-use 490ml cartridge.
Applicator gun sold separately.
Plexus MA320 Methacrylate Adhesive for Structural Bonding
Designed for structural bonding of metal, composite, and thermoplastic assemblies,
Plexus MA320
is a methacrylate
adhesive
that serves as an ideal selection for composite bonding applications. Due to its need for virtually no surface preparation, this adhesive is well suited for use in the engineering construction,
marine
, and transportation industries. After it is combined at a 10:1 ratio, Plexus MA320 offers an 8 to 12-minute window of working time, and within 25 to 30 minutes will achieve 75% ultimate strength. Supplied in ready to use cartridges, this adhesive is available in black, white, or off-white.
Offered in 200-litre drums or 20-litre pails and dispensed as a non-sagging gel,
Plexus MA320 Structural Adhesive
provides superior toughness at temperatures below -17°C. The fixture time³ for this adhesive is 25-30 minutes, and the operating temperature is -55°C to 121°C. Gap filling⁷ for Plexus MA320 Structural Adhesive is 1mm to 8mm, the mixed density is 0.94 g/cc, and the flash point is 9°C. This material displays excellent resistance to salt solutions, as well as acids and bases (3-10 pH), but is susceptible to strong acids and bases, polar solvents, and hydrocarbons (gasoline and diesel fuel included).
Uncured and at room temperature, the viscosity of
Plexus MA320 Methacrylate Adhesive
is 100,000 – 125,000 cP, and of the activator is 40,000 – 60,000 cP. The density of the adhesive is 0.92 g/cc, and of the activator is 1.04, and 1.72 g/cc. The mix ratio by volume of the adhesive is 10, and of the activator is 1. The mix ratio by weight of the Plexus MA320 Structural Adhesive is 8.9, and of the activator is 1. This adhesive is also available in black, and the mix ratio by weight with the 320 white activator is 5: 4: 1. For additional technical data on this product, please see the
Plexus MA320 Technical Data Sheet
.
Plexus MA320 Characteristics:
Working Time
Fixture Time
Operating Temperature
Gap Filling
Mixed Density
Flash Point
8-12 Minutes
25-30 Minutes
-55°C to 121°C
1mm to 8mm
0.94 g/cc
9°C
While handling
Plexus MA320
, safety glasses and gloves should be worn in order to avoid eye and skin contact. If contact is made to the skin, immediately wash with soap and water. This product is flammable and is made with Methacrylate Ester. Medical attention should be sought if this product makes contact with the eyes. To prevent volatile gasses, steam, and entrapped air while mixing Plexus MA320, mix only the amount of material required for use. Gap thickness should also be confined to no more than 8mm. For additional support regarding handling precautions, please
contact a Krayden Technical Representative
.
Plexus MA320 Structural Adhesive
is an ideal choice for composite bonding applications in the marine, engineering construction, and transportation industries. Offering excellent durability in low temperatures, this material is recommended for Acrylics, PVC, Polyesters, Urethanes, Styrenics, Vinyl Esters, and much more. Plexus MA320 Structural Adhesive has a shelf life of 1 year from the date of manufacture, and it is recommended that substrates are tested with the adhesive in the expected service conditions in order to determine its fitness for use. For more information regarding Plexus MA320, please contact
Krayden
, an authorized distributor of
Plexus Adhesives
.
Plexus MA320
Description
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Plexus MA320 is an excellent choice for composite bonding applications in the transportation, marine, wind energy, and engineering construction industries because of its high strength and durability.
Key Features
Open time 8 – 10 mins
Exceptional low temperature impact resistance
Fast, consistent strength development at room temperature
High elongation and excellent stress distribution
Non-sag thixotropic dispensing
Key Substrates
Composites – DCPD, FRP, Gelcoat, Phenolics, Epoxy Based Composites, RIM
Coated metals – Powder coated or E-coated Metals
Thermoplastics – ABS/ ABS Blends, Acrylics, PBT, Polycarbonate, Rigid PVC, TPUs
Raw metals with PC120 – Aluminum, Stainless Steel, Raw Steel, etc.
Properties
Color: Off-White, White, Black
Mix Ratio: 10:1
Shear Strength: 1,500-2,000 psi (10.3 - 13.8 MPa)
Adhesive: A: 135,000-175,000 cP
Activator: B: 30,000-70,000 cP
Working Time Min: 8 minutes
Working Time Max: 12 minutes
Fixture Time Min: 25 minutes
Fixture Time Max: 30 minutes
Tensile Strength Min: 1,700 psi (11.7 MPa)
Tensile Strength Max: 2,200 psi (15.2 MPa)
Tensile Elongation Min: 60 %
Tensile Elongation Max: 100 %
MA320 White
Contact us
Data sheets
SDS
TDS
Other languages
Packaging & Stock no.
US
Stock #
Size
32000X
490 ML CREAM
32000BX
490 ML BLACK
32000WX
490 ML WHITE
32200
5 GAL ADHESIVE
32420
5 GAL ACTIVATOR
32910
5 GAL ACTIVATOR BLACK
32800
50 GAL ADHESIVE
35420
5 GAL ACTIVATOR WHITE
EMEA
Stock #
Size
32000
380 ml
32000/WH
380 ML WHITE
32200
20 LITER ADHESIVE
32800
200 LITER ADHESIVE
32420
20 LITER ACTIVATOR