Industrial Electronic Printed Circuit Boards Repair Kit Epoxy Glue 2104, 2.5 gm

Description

Technical Product Bulletin
RIGID EPOXY STAKING COMPOUND RT CURE
PRODUCT DESCRIPTION:
AA-BOND 2104
is a thixotropic epoxy system recommended for critical electronics, aerospace and industrial bonding, laminating and reinforcing applications requiring an adhesive with high-fill, non-sag characteristics.
AA-BOND 2104
solvent-free adhesive is easily mixed and used for staking components to printed circuit boards for enhanced mechanical rigidity, and for bonding, laminating and repair applications involving metals, glass, ceramics, wood and many plastics.
AA-BOND 2104
hardens to a tough, enamel-like coating offering good chemical resistance as well as superior physical and mechanical properties.
AA-BOND 2104
provides good electrical insulation and resistance to weather, galvanic action, petroleum products and lubricants, alcohol, salts, mild acids and alkalis, and other organic and inorganic compounds.
GENERAL PROPERTIES:
Appearance
Milky,  Translucent
Cure Type
Room temperature or Heat cure
Benefits
·
Great for aerospace applications
·
Great for reinforcing applications
·
Bonds to many substrates
Mix Ratio by weight
100:22 / Resin:Hardener
Substrates
Staking components, bonding, laminating, repair applications, metals, glass, ceramics, wood and many plastics
Typical Application
PCB components, aerospace, anything where superior properties are required
UNCURED PROPERTIES:
Solids Content
100%
Specific Gravity, mixed
1.19 g/cc
Pot Life
30 minutes
Shelf life
1 Year
THERMAL PROPERTIES:
CTE, linear
30.6 µin/in-°F
@Temperature 68.0 °F
Operating Temperature
-60 to 125 °C
CURE SCHEDULE:
4 hours
@ 65°C
24 hours
@ 25°C
MISC PROPERTIES:
Hardness, Shore D
88
Izod Impact, Notched
0.750
ft-lb/in
ELECTRICAL PROPERTIES:
Volume Resistivity
6.00e+13 ohm-cm
1.00e+10 ohm-cm
@Temperature 212 °F, 100°C
Dielectric Constant
4.6
@Frequency 1000 Hz
Dielectric Strength
410 kV/in
Dissipation factor
0.010
@Frequency 1000 Hz
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1)
Carefully clean and dry all surfaces to be bonded.
2)
Apply
AA-BOND 2104
mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3)
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4)
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage.
5)
A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application