Harley-Davidson HD9813RG-TKIT Road Glide Front Audio Kit (1998-2013)

Description

Our eBay Store
Add to Favorite Sellers
All pictures are representative only, please read full description and verify fitment with manufacturer.
Product Description:
HD9813RG-TKIT
Harley-Davidson® Road Glide® Front Audio Kit (1998-2013)
Tired of not hearing your music no matter how high you turn it up? Then you need our 400 watt, front audio kit designed for Harley-Davidson® Road Glide® motorcycles. Our audio kit is a complete plug and play installation system consisting of a 4-channel Power amplifier and direct fit 6.5” speakers. It literally has everything you need to start rocking out while you ride.
Harley-Davidson® and Road Glide® are registered trademarks of Harley-Davidson Motor Company
Kit Includes:
No drilling or cutting required
Kits bolt to factory attachment points
Direct connect wiring harnesses for Harley-Davidson® models
Prewired to accommodate rear Tour-Pak® if available
1
TM400X4ad Power Marine 400 Watt Class-ad 4-Channel Amplifier
TMS6RG Power 6.5" Full Range Fairing Speaker '98-'13 HD Road Glide
RFKHD 1998+ Amplifier Mounting Kit
1
Tour-Pak® requires purchase of additional TMS5 (1998-2013)
NOTE:
May not be compatible with
CVO™
and
Screaming Eagle™
models
Element Ready - Motorcycle Solutions
These models are protected against Dust, UV, Temperature, Water, Corrosion & Vibration.
Rockford Fosgate’s PMX series of source units and remotes are fully tested against UV radiation degradation as well as tested to IPX water intrusion standards. We also fully test the units for ever changing environmental conditions such as temperature extremes, as well as vibration testing to make sure they can take a bump and keep performing like a Rockord Fosgate product should.
Dust -
We make sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.
UV Inhibitor Materials -
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.
Thermal Shock Tested -
Products are tested for extreme temperature operation as well as severe fluctuations in ambient temperature. Components are taken to both low and high temperature extremes and then tested to ensure operational capabilities.
Water Tested –
IPX5 and IPX6 Ratings allow for the components to be directly sprayed with water without water incursion.
Corrosion Protection –
Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.
Vibration –
Knowing our equipment will not be sitting still, we subject it to full vibration and shock testing to ensure that it will take abuse and keep performing to our stringent standards.
Constant Power
U.S. Patent 7,994,857
Constant Power is a patented circuit topology that provides instantaneous delivery of output power over varying impedance loads.
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate’s patented Constant Power circuit design actively monitors and increases voltage and current as the speaker’s impedance rises with music, resulting in up to a 25% increase in total amplifier power.
VAST Surround (speakers)
U.S. Patent Patent Pending
The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%.
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing), which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.
The new patent-pending VAST™ technique is a result of combining a unique design concept with precise manufacturing to provide up to 25% more effective radiating cone area.
Class-AD (amplifier)
This technology allows the amplifier to produce more power with less current draw from the vehicle's charging system.
Rockford Fosgate's AD topology brings out high efficiency bd amplifier design to a full range application. Class AD uses our Dynamic Frequency Switching to increase the switching frequency during lower output levels for better signal resolution. This coupled with Post Choke Feedback Filtering compares the input signal to the output signal at the speaker connector removing any unwanted distortion. These technologies eliminate the inherent switching noise associated with typical class D designs and also provide instantaneous output power over varying impedance loads.
C.L.E.A.N. Set-Up
U.S. Patent 8712066
Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
Time and sophisticated test equipment have been replaced, with Rockford’s integrated level setting technology called CLEAN (Calibrated Level Eliminates Audible Noise). Using simple LED indicators to identify both signal clipping from the audio source and the output level clipping to the speakers. This precise level set-up eliminates speaker damaging distortion.
CEA-2031 (speakers)
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.
CEA-2006 (amplifier)
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
We are Authorized Dealers and unit will come with full manufacture warranty
Shipping
Returns
Payment
About Us
FREE SHIPPING AVAILABLE!*
Drive-In Autosound
ships FedEx ground with signature required.
*Shipping to Alaska/Hawaii/Puerto Rico will be an extra .00 charge.
Return Policy:
You can return a product up to 30 days from the date you purchased it. Any product you return must be in the same complete condition you received it and in the original packaging. Return shipping costs will be the responsibility of the buyer.
Payment Terms:
We accept payments through Paypal.
Drive-In Autosound, a Colorado company since 1962, specializes in car audio, window tint, clear bra, remote start, truck lifts, custom wheels and a whole lot more! Offering top brands like Pioneer, Kenwood, Rockford Fosgate, JL Audio, JBL, Pro Comp. Rigid, Smittybilt, ARB, Westin and hundreds more! Drive-In Autosound is the experts in mobile electronics and aftermarket accessories for your car, truck or jeep. While we have grown to be an industry leader, we are still a family-owned business focused on quality, service and providing every customer with the best possible experience.
DONT BUY FROM AN UNAUTHORIZED DEALER AND END UP WITH NO WARRANTY. WE ARE AUTHORIZED TO SELL ONLINE