GCP APPLIED TECHNOLOGIES BITUTHENE LIQUID MEMBRANE 1.5GL Unit

Description

Product Data Sheet
Description
Bituthene Liquid Membrane is a two component, elastomeric, cold applied, trowel grade material designed for a variety of uses with the Grace waterproofing systems. The VOC (Volatile Organic Compound) content is 10 g/L. Architectural and Industrial Maintenance Regulations limit the VOC content in products classified as Architectural Coatings. Refer to Technical Letters at graceconstruction. com for most current list of allowable limits.
Advantages
Liquid applied
—conforms to irregular profiles
Waterproof
—resistant to water vapor and water pressure
Tough, rubber-like
—flexible and damage resistant
Chemically cured
—unaffected by in-service temperature variations
Cold applied
—no flame hazard
System compatible
—formulated for use with Grace waterproofing membrane systems
Use
Bituthene Liquid Membrane is ideally suited for the following uses:
Fillet material at inside corners
Reinforcement material at inside corners
Flashing material around drains, protrusions, curbs and parapets
Sealing material at terminations
Repair material for defects on concrete surfaces
Flashing material at corners
The two parts of Bituthene Liquid Membrane are mixed on site and troweled on to provide a simple and quick waterproofing detailing aid in conjunction with Bituthene, Preprufe and Procor systems
Compatibility
Bituthene Liquid Membrane is completely compatible with Bituthene, Preprufe and Procor, and with existing asphalt or coal tar-based waterproofing materials. It is also compatible with cured silicone and polyurethane sealants. It is not compatible with creosote, pentachlorophenol, linseed oil or polysulfide-based sealants.
This product ships freight with YRC Freight to a commercial dock, according to quantity purchased.  Please inquire for quote.