Epoxy Putty Steel Stick Epoxy Reinforced Repair Putty Two-Component Kit 28g 3pcs

Description

Universal Epoxy Putty kit (3pcs)
You will get:
Epoxy Putty - 1stick 28g
Small sheet of sandpaper (P80)
Alkohol Pre pad
The repair will be completed when the resin cures in 30 minutes.
The repair resin is designed to harden within 3-5 minutes and cures in 10 minutes.
Repair can be made ideally at temperatures from 50 °F to 75°F (10°C to 24°C). Repairs made at lower temperatures will take longer to cure.
Complete Kit
Seals Small Holes, Leaks & Weak Seams
Hardens Like Steel
Permanent
How to use?
1.
Before applying to the smooth surface, lightly sand the surface with the sanding paper.
2.Surface to be repaired must be clean, dry and dust free. Clean with an alcohol wipe. Put on plastic gloves.
3.Using knife, cut off the required amount of epoxy putty.
4.Using wet fingers knead the epoxy putty together until a uniform feeling is achieved.
5.Immediately apply mixed product to the repair area using wet fingers to work putty into repair area. Use wet fingers
to smooth texture.
Remove excess epoxy with wet spreader before epoxy hardens. Hardens in 5 minutes.
6.After 60 minutes, wet sand as necessary using the sanding sponge.