Concrete CRACK KIT Epoxy Injection Fix Pools Foundation Repair Walls Floor ATC

Description

ATC Epoxy – “Crack-Kit” Concrete Crack Repair Kit
The Concrete Crack Kit from ATC has everything you need to perform low pressure crack injection and concrete repair at an affordable price.  The injection epoxy is formulated to repair cracks in wood & concrete structures that are hairline to medium sized in width from 1/400″ to 1/4″ wide in concrete walls, floors, slabs, columns and beams. The LR321 epoxy has the viscosity of light oil and a very low surface tension, allowing it to penetrate fine to medium-width cracks in dry, damp or wet conditions.  Patented Crack Ports virtually eliminate under-filling the crack with their check valve ball bearing that prevent backflow, even after the resin is dispensed into the port.   This epoxy formulation is identical to their popular, high strength DOT epoxy adhesives but packaged in smaller easy to use cartridges.  Cures to a solid state, no shrinkage, PSI ratings are an average of five times stronger than concrete.  Convenient easy to use, single tube cartridge – fits standard caulk guns.  The low viscosity LR321 deep penetrating epoxy is similar to a light oil, and exhibits tenacious bonding in structural concrete cracks.  The Thick Gel paste Miraclebond 1310 epoxy included can be used as a capping paste, or to repair larger cracks in concrete and wood.
Contains everything needed to structurally repair 8-10 feet of crack
Meets Florida DOT Approved Products List
Multiple Uses:
Low Pressure Crack injection
• Concrete crack and spall repair
• Bonding agent for concrete, brick, stone, tile, steel, and wood
• Patching Material
• Primer for industrial coatings
• Crack Healer & Sealer
• Epoxy Grouting of bolts, dowels, pins, etc. into horizontal concrete surfaces
• Gravity fed structural crack repair
• Becomes a Mortar when mixed with sand
• Capping paste sealer Miraclebond 1310 included
• Fix larger vee-notched or hairline cracks
• Repair Rotted wood
• Fix Loose railing
• Fix Broken steps
• Fix Broken Concrete
Benefits:
Easy to mix, Easy to use, conveniently packaged in standard caulking tube sizes
• Chemically bonds with the concrete to restore strength Bond
• Once cured, this Non-shrink material is resistant to water, salts, oils, & mild chemicals
• Forms a permanent polymeric bond that will not re-emulsify
• Seals out water, chlorides, salt, protects rebar in the concrete from corrosion
• Low viscosity epoxy penetrates fine to medium-width cracks in dry, damp or wet conditions
• Cures to a solid state, no shrinkage, returns structure to its monolithic strength
• Low cost method to structurally re-bonding cracked concrete and wood members
• Superior physical properties, capable of restoring a cracked structure to its original state.
Kit Includes:
3ea. cartridges of LR-321 Injection Resin Epoxy
• 3ea. cartridges of Miracle Bond 1310 Paste Epoxy
• 12ea. Crack Injection Ports
• 1 Plastic Putty Knife
• 3ea. T58CBS Nozzles
• 3 ea. Flow Restrictors
• 2 Wood Depressors
• 1 Pair Latex Gloves
• 4 Mixing Cups