Brown & Sharpe #13 Universal Cylindrical Grinder 8"x14" &Tool Grinder In One!!

Description

Important Bidding /Buying Information Related To This Listing;
We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On
Occasion
And Because Of This We Ask That You Be 100% Sure You Know What Your Buying & What To Expect When It Arrives
Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However,Should This Not Be Possible Or
Practical
Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives !!!
Machine Details & Specifications
(1) Pre-Owned/Used
1
Pre-Owned/Used Brown & Sharpe #13 Universal And Tool Grinding Machine S/N: 525-13-1782
NEW: 1965 CAPACITY: - GRINDS WORK UP TO ......................8" DIA. - GRINDS LENGTH UP TO ..................... 14” - DISTANCE BETWEEN CENTERS .................24" *****WHEELHEAD***** - GRINDING WHEEL SIZE ....... 7" X 1/2" X 1-1/4" - GRINDING WHEEL SPEEDS (3) …2730,3600&5150 RPM - WHEELHEAD TRAVEL ................... 8-3/8" - WHEELHEAD SWIVELS, LEFT & RIGHT ..... 110 DEGREES - WHEELHEAD VERTICAL ADJUSTMENT....... 8-3/8" *****SWIVEL TABLE***** - ANGULAR SETTING TO LEFT & RIGHT ..... 90 DEGREES - FINE SCREW ADJ.FOR SETTING TAPERS UP TO 3"PER FT. - TABLE TRAVEL ............................... 22" - POWER TABLE SPEEDS (6) ..... 7-3/4" TO 100" IPM - TRAVEL PER HANDWHEEL REV. 1/4"SLOW,6-1/4" FAST *****HEADSTOCK & TAILSTOCK***** - SWIVELS LEFT & RIGHT .............. 100 DEGREES - SPINDLE SPEEDS (4) ................ 128 TO 540 RPM - SPINDLE TAPER FOR THE WORKHEAD & TAILSTOCK ..B & S No. 7 APPROX. DIMS. ........................68" x 55" x 65"H APPROX. WIGHT ..............................3000 LBS. ***MACHINE FEATURES*** ***UNIVERSAL WHEELHEAD, TABLE & WORKHEAD ***DOUBLE ENDED WHEEL SPINDLE ***DUAL LIVE/DEAD HEADSTOCK SPINDLE ***MANUAL TABLE TRAVERSE AND INFEED OF THE WHEELHEAD ***FINE CROSS FEED KNOB (.0001" ON WORK DIA.) ***VERTICAL HANDWHEEL GRADUATED TO READ .0005" ***1 H.P. WHEELHEAD MOTOR ***1/6 H.P. WORKHEAD MOTOR MACHINE USES 5"OR 7" DIAMETER GRINDING WHEELS WORKHEAD SET-UP WITH A BUCK 6” MAG CHUCK MACHINE IS WIRED FOR 3/60/460 VOLTS ****SPECIAL TOOLMAKERS TAKE NOTICE**** "THE #13 B&S HAS BEEN VALUED BY PRECISION TOOLMAKERS FOR IT'S VERSATILITY, AS IT HAS BROAD ADAPTABILITY FOR GRINDING THE CONTOURS OF MILLING CUTTERS,REAMERS AND FORM TOOLS.....NOT TO MENTION FOR GRINDING A WIDE RANGE OF CYLINDRICAL GRINDING AS REQUIRED BY THE TYPICAL SHOP." Overall Condition - Very Good , Runs Great !!!
This Press Works Great And  It Was Built To Last  !!!
It's In Beautiful Overall & Operating Condition As Taken From Service Recently From A Local Shop !
Important Safety Notice
...There may not be any or adequate  safety devices or E-stops on this machine and there  may not be any or adequate safe guards to protect the operator ,upgrades may be required and should you purchase this item your assuming the responsibility for any and all safety upgrades needed.
Buyer's Responsibility And Indemnity:  It shall be Buyer's responsibility to ensure that any machinery and/ or tooling purchased from
Davis Machinery LLC
is installed and operated in a proper and safe manner.  The Buyer also acknowledges that it may
have to install or change guards, safeties, warnings or other components to ensure that the machinery and/ or tooling purchased hereunder  will conform to all laws, regulations, ordinances, codes, insurance requirements and industry standards,Including any and all
Safety Requirements & Standards
Packing /Skidding 5.
Packing /Crating 5.
Or pick it up yourself ,no charge for loading ;however, if your not Tax Exempt For RI you'll need to pay RI 7% sales tax
Lets talk
Davis Machinery LLC
4012259582
b d a v i s at d a v i s m a c h i n e r y d o t c o m
Important Bidding /Buying Information Related To This Listing;
We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On
Occasion
And Because Of This We Ask That You Be 100% Sure You Know What Your Buying & What To Expect When It Arrives
Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However,Should This Not Be Possible Or
Practical
Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives !!!
Machine Details & Specifications
(1) Pre-Owned/Used
1 Ton Mead  Pneumatic /Air Press W/Quick Change  6"x6" Die Set &  2 Hand Controls
Model
-
DM 400X4,000
Stroke - 0-4"....S
et
U
p
F
or
2"Presently
Bed Size -6-3/4-"x "8-1/2"+/-
Throat Depth - 5-1/2"+/-
Max Shut Height-14"+/- Adjustable (See Photo)
Overall Size- 7"x 14"x 31"+/-
Estimated Weight - 150 lbs+/-
Offered With;
2 Hand control/Dual Pushbuttons
6"x6" Die Set W/Quick Change Set Up
This Press Works Great And  It Was Built To Last  !!!
It's In Beautiful Overall & Operating Condition As Taken From Service Recently From A Local Shop !
Important Safety Notice
...There may not be any or adequate  safety devices or E-stops on this machine and there  may not be any or adequate safe guards to protect the operator ,upgrades may be required and should you purchase this item your assuming the responsibility for any and all safety upgrades needed.
Buyer's Responsibility And Indemnity:  It shall be Buyer's responsibility to ensure that any machinery and/ or tooling purchased from
Davis Machinery LLC
is installed and operated in a proper and safe manner.  The Buyer also acknowledges that it may
have to install or change guards, safeties, warnings or other components to ensure that the machinery and/ or tooling purchased hereunder  will conform to all laws, regulations, ordinances, codes, insurance requirements and industry standards,Including any and all
Safety Requirements & Standards
Packing /Skidding .
Packing /Crating 5.
Or pick it up yourself ,no charge for loading ;however, if your not Tax Exempt For RI you'll need to pay RI 7% sales tax
Lets talk
Davis Machinery LLC
4012259582
b d a v i s at d a v i s m a c h i n e r y d o t c o