3M DP810NS Tan Scotch-Weld Low-Odor Adhesive 48.5 mL 12 per case w/ Free Plunger

Description

Product Info
3M Scotch-Weld Low Odor Acrylic Adhesive DP810NS Tan, 48.5 mL, 12 per case with Free EPX Plunger*
Product Info
*Must use 3M newly redesigned mix nozzles and Plunger for all 48.5 and 50 mL DuoPak Cartridges (See our Ebay Store for pricing)
Details
Provides thorough mixing and precise placement of two-component structural adhesives
Tapered tip can be cut for bead size
Available in a variety of designs to fit all cartridge sizes
Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge
Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing
Choose 3M™ Scotch-Weld™ EPX™ Mixing Nozzles for efficient application of 3M™ Scotch-Weld™ Structural Adhesives in Duo-Pak (DP) cartridges. Each nozzle provide thorough mixing and precise placement of two part adhesives and potting compounds.
Provides Thorough Mixing and Precise Placement
Our 3M™ Scotch-Weld™ EPX™ Mixing Nozzles perform to exact requirements for easy uniform application. These 3M approved accessories work with 3M Duo-Pak cartridges to simultaneously meter, mix and apply two-part adhesives and potting compounds. And, the tapered tips can be cut for precise bead size.
Recommended Applications
Attach to 3M Duo-Pak structural adhesive cartridges
Dispense with 3M EPX Manual or pneumatic applicators
__________________________________________________________________________________
Description:
3M(TM) Scotch-Weld(TM) Low Odor Acrylic Adhesive DP810NS is a non-sag, toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M(TM) Scotch-Weld(TM) Acrylic Adhesive DP810NS contributes to a safer work environment compared to typical acrylic adhesives.
Full Description:
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M(TM) Scotch-Weld(TM) Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
Sporting goods (metal to metal, metal to plastic bonding)
Appliance manufacturing (metal to metal, metal to glass)
Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M(TM) Scotch-Weld(TM) Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M(TM) Scotch-Weld(TM) Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.
Don't see the size or color you need? Please ask us for assistance!
About Us
We carry a full line of 3M Industrial and Consumer products.  Our eBay listing is only a small fraction of our 20,000+ 3M items offered.  Please feel free to contact us for any of your 3M needs.
Shipping
Items are usually shipped within 1-3 business days from the date funds are received.  Tracking numbers are provided once the product ships from our location.
Unfortunately we are
not
able to ship to
P.O. Boxes
or
APO/AFO
or
International
addresses at this time.
Payment & Checkout
We accept payment via Paypal.
Payment is due upon purchase
Sales Tax:
Sales tax of 7.00% due for Illinois residents.
Return Policy
We will replace any defective merchandise with the same product.  If the same product is not available a credit for the product and shipping will be issued.
We do not accept returns for incorrectly ordered or installed items.
All returned items must be in their original packaging.
Contact Us
For questions regarding our products please message us.
You may reach us between 9am and 5pm CST Monday - Friday.
<div style="text-align:center"><img src="http://ti2.auctiva.com/sw/java.gif" border="0"><br><table align="center"><tr><td><a style="text-decoration:none" href="http://store.auctiva.com/mpsupplies"><img src="http://ti2.auctiva.com/sw/images.gif" border="0"></a></td><td height="27px" valign="middle" align="center"><font face="arial" size="2"><b><a href="http://store.auctiva.com/mpsupplies">mpsupplies</a> Store</b></font></td></tr></table></div>
<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk1" target="_blank"><img src="http://ti2.auctiva.com/images/sc1line1.gif" border="0"></a>